Documentation made easier
tapset::networking − systemtap networking tapset
This family of probe points is used to probe the activities of the network device.
netdev.receive
Data received from network device.
See
probe::netdev.receive(3stap)
for details.
netdev.transmit
Network device transmitting buffer
See
probe::netdev.transmit(3stap)
for details.
netdev.change_mtu
Called when the netdev MTU is changed
See
probe::netdev.change_mtu(3stap)
for details.
netdev.open
Called when the device is opened
See
probe::netdev.open(3stap)
for details.
netdev.close
Called when the device is closed
See
probe::netdev.close(3stap)
for details.
netdev.hard_transmit
Called when the devices is going to TX (hard)
See
probe::netdev.hard_transmit(3stap)
for details.
netdev.rx
Called when the device is going to receive a packet
See
probe::netdev.rx(3stap)
for details.
netdev.change_rx_flag
Called when the device RX flag will be changed
See
probe::netdev.change_rx_flag(3stap)
for details.
netdev.set_promiscuity
Called when the device enters/leaves promiscuity
See
probe::netdev.set_promiscuity(3stap)
for details.
netdev.ioctl
Called when the device suffers an IOCTL
See
probe::netdev.ioctl(3stap)
for details.
netdev.register
Called when the device is registered
See
probe::netdev.register(3stap)
for details.
netdev.unregister
Called when the device is being unregistered
See
probe::netdev.unregister(3stap)
for details.
netdev.get_stats
Called when someone asks the device statistics
See
probe::netdev.get_stats(3stap)
for details.
netdev.change_mac
Called when the netdev_name has the MAC changed
See
probe::netdev.change_mac(3stap)
for details.
probe::netdev.receive(3stap), probe::netdev.transmit(3stap), probe::netdev.change_mtu(3stap), probe::netdev.open(3stap), probe::netdev.close(3stap), probe::netdev.hard_transmit(3stap), probe::netdev.rx(3stap), probe::netdev.change_rx_flag(3stap), probe::netdev.set_promiscuity(3stap), probe::netdev.ioctl(3stap), probe::netdev.register(3stap), probe::netdev.unregister(3stap), probe::netdev.get_stats(3stap), probe::netdev.change_mac(3stap), stap(1), stapprobes(3stap)